| 加工定制：否 | 类型：外圆磨砂轮 | 材质：金刚石 |
| 结合剂：金属砂轮 | 形状：杯形砂轮 | 品牌：力邦LiBon |
| 型号：20孔 | 工作线速度：无 | 粒度：100-600#目 |
| 适用范围：多用途 | 圆度<：无 | 圆柱度<：无 |
| 工艺：电镀 | 规格：100#,150#,200#,320#,400#,600#,20孔*直径100MM |
產 品 說 明
力邦LIBON鑚石砂輪具有非常强悍磨削能力，具有锋利的棱角及耐磨耗性，可用于硬質合金、切削工具、鑄鐵、不鏽鋼、玉石、陶瓷、玻璃、石英、低碳鋼、矽、石墨、塑膠、半導體電子材料等脆硬材料。
注意事項
1.裝在磨床或磨刀機上使用之前，先經過平衡后才能使用。
2.在未使用完之前不要隨便從幾台上拆下來，會影響安裝效果。
3.避免放在受潮的地方，須儲存在比較乾燥通風良好的地方，避免靠近酸性或堿性材料的地方。
4.再堅固強悍也需要保管好，否則其性能會受到環境影響而改變，如強度和磨削能力降低，受腐蝕，外形發生變化，受潮質量下降。
5.搬運過程中，應該輕拿輕放，以免受到強烈震動撞擊，導致碰傷造成碎裂或掉邊等現象。
溫馨提示：使用砂輪作業時，請佩戴防護眼鏡或面罩及手套。
The product description
LIBON diamond grinding wheel has the very strong grinding ability, have sharp edges and abrasion resistance, can be used for cemented carbide cutting tools, cast iron, stainless steel, jade, porcelain, glass, quartz, graphite, low carbon steel, silicon plastic semiconductor electronic materials and other hard brittle materials.
Matters needing attention
1. In a grinding machine or the knife before use, first should only be used after the balance.
2. Don&＃39;t literally from the machine before using the removed, will affect the installation effect
3. Avoid in damp place, must be stored in a dry ventilated place, avoid close to acidic or alkaline materials.
4. Strong again strong also need to keep, or its performance will be affected by environment change, such as intensity and grinding capacity reduction, corrosion, appearance change, quality be affected with damp be affected with damp.
5. In the process of handling to should take put down gently, in order to avoid strong vibration impact, causing bruising or loose edge crack due to wait for a phenomenon.
Warm prompt: when using the grinding wheel, please wear protective goggles or face mask and gloves
| 热销宝贝 |
此模板由精准推广王提供，我也要免费出现在这里 |
